Our site has a system which serves search engine function. You can search all data in our system with above button which written 'What did you look for? ' Welcome to our simple, stylish and fast search engine system. We have prepared this method why you can reach most accurate and most up to date knowladge. The search engine that developed for you transmits you to the latest and exact information with its basic and quick system.
You can find nearly everything data which found from internet with this system.
If you would post pics somebody might be able to tell you how much it might be worth. Open the cylinder. With it open, look at the Model Number straight below where the barrel screws into the frame. Probably M 37, or MOD 37, or MOD 37-1, or something along those lines.
There are other Model Numbers it could be, depending on what frame size it is and what particular model it is. Probably has a 2' barrel, maybe 3' or even 4', again, depending on Model and frame size. Turn it upside down and look for a serial number on the butt, that is the bottom of the grip-frame.
Condition is everything. Your revolver could be worth anywhere from $150 to $500, depending on the specific Model, barrel length, and most of all, condition.
Airweight the term 'airweight' is not a specific model of gun, but rather a reference to a whole slew of guns, made across a 50-year time period, that were all based on a small frame (J-frame) that was made from an aluminum alloy rather than regular steel, stainless steel, or that modern alloy that's like titanium. An airweight.38 S&W is normally a 5-shot snub-nosed revolver. Normally round-butt (the back corner of the grip frame (handle) is rounded off, not squared with a sharp corner). Normally blued / black finish back in the old days, before the 1980s when nickle finish or stainless steel construction became more popular.
If you have a plain-Jane model 37 or 38, two inch barrel round butt blued in fair condition, you might have a gun worth $300. If it's got a 3' barrel, square butt, it's more rare and valuable. I would love to own one of those, but they bring a pretty penny. If it's a modern gun with a dull silverish finish, there are many like it for sale on Gunbroker where you can compare prices and see values. There are also K-frame Airweights, specifically the S&W Model 12. I have a Model 12-2 with a round butt and 4' barrel.
The Model 12s have 6 shot cylinders. It is true that the vast majority of Airweights were/are the 5 shot j-frames.
I have one of those 3' square butt Model 37s. Paid less than $200 for it, but it is very, very finish challenged. It is mechanically fine, but it looks like it scrubbed around in the bottom of a toolbox or under a truck seat without a holster or any other protection.
US Revolvers - Smith & Wesson 31-60 Smith & Wesson 31 Regulation Police Notes: The Model 31 is based on an earlier revolver, the Model 30 Hand Ejector (which was in turn based on the earlier M-1903 Hand Ejector), and was built on the new (at the time) I-Frame starting in 1948, and continuing until 1991. The Model 31 was, early in production and issue, referred to as the.32 Regulation Police, though this term properly refers to a pre-war Smith & Wesson revolver in the same caliber but the same general design as early Model 31 production versions. Finish was blued or nickel-plated, and the revolver had a rounded butt with walnut grips. The Model 31-1 was a version of this revolver based on the J-Frame instead of the old (by then) I-Frame; it was built from 1960-76.
The Model 31 Regulation Police Target was a rare variant of the Model 31 (only 200 built); it had an adjustable target-style rear sight, but is otherwise identical to the standard Model 31 with a 4-inch barrel for game purposes. Original barrel lengths available were 1.25, 2, 3, 3.25, 4, and 4.25 inches; in 1957, barrel lengths were standardized at 2, 3, and 4 inches, with the 4-inch barrel being dropped from production in 1978. (The Models 31-2 and 31-3 were thus produced only with 2 or 3-inch barrels, and Model 31-1s were produced only with 2, 3, and 4-inch barrels.) Original barrels were pinned, but in 1982, the pinning of the barrel was deleted, and in 1988 with the Model 32-2, a new yoke retention system and radius stud package increased safety of the unpinned barrel. Finishes were blued or nickel-plated; the original front sight was a rounded half-moon shape; in 1957, this was changed to a 0.1-inch wide serrated ramp. The Model 31 had a square-notch rear sight; this was originally a bit narrow, but the notch width was increased to 0.125 inches in 1990 (the Model 31-3). The grips were originally checkered walnut grips with Smith & Wesson medallions set within them; the checkering was dropped in 1968.
The biggest addition Skyrim patch 1.9 carries is the additoon of new Legendary difficulty settling and Legendary Skills. Skyrim Patch 1.9 is already available for PC gamers. Bethesda has just released Skyrim Patch 1.9 for PS3 and Xbox 360 version of the game. Skyrim title update 1.9 xbox 360.
The original frame used was the I-Frame, but with the Model 31-1 in 1961, the base frame of the Model 31 was changed to the slightly-larger J-Frame, with weight going up somewhat. In all almost incarnations, the Model 31 remained a light revolver for the most part suitable for short-range self-defense work or as an undercover weapon, though one of the early versions with a 4.25-inch barrel was almost a creditable combat weapon. The Model 331Ti Chiefs Special Airlite Ti In 1999, the Model 31 was reintroduced as the Model 331Ti, or the.32 Magnum Chiefs Special Airlite Ti. The Model 331Ti was produced until 2003. Though the basic form of the Model 331Ti was along the same lines as the Model 31, the frame of the Model 331Ti is of light alloy, with a cylinder of titanium alloy, resulting in a very lightweight revolver.
Smith And Wesson Model 37 Airweight Revolver
All barrels for the Model 331Ti were 1.875 inches; a 3-inch-barrel version was planned, but never produced. Sights are fixed front and rear; on prototypes and the very early production models, the front sight was pinned; however, few were built, and fewer sold, as the pinned front sights tend to produce an aiming error even when lined up properly. The barrel and shroud are not attached to the frame in the normal manner for Smith & Wesson revolvers, requiring the use of a special wrench for removal, attachment, or adjustment. The trigger is a wide, smooth combat trigger, and the hammer checkered. The grips may be Uncle Mike’s Boot Grip or a DymondWood grip.
(The Model 332Ti with the DymondWood grip is a bit lighter than the same weapon with an Uncle Mike’s Boot Grip; in game terms, they shoot identically, but in real terms, the Uncle Mike’s Grip is more comfortable to shoot.) The finish is matte stainless with a dark gray cylinder (due to the titanium alloy). The Model 331-1Ti was supposed to be the 3-inch-barrel “target” version, with micrometer-adjustable rear sights and a match-quality barrel; this version was never actually produced (though prototypes were made), but I have included it below as a “what-if.” It would have entered production in 2000 if production had actually occurred. The Model 331-2Ti, which replaced the standard Model 331Ti in production, is the same weapon in game terms except that it has an internal lock that may be locked and unlocked with a key inserted into the side of the frame; this lock blocks the movement of both the hammer and trigger. The Model 331-3Ti was supposed to be a version of the Model 331-2Ti with a 3” match barrel and a micrometer-adjustable rear sight; again, only prototypes were built and for game purposes, it is identical to the 331-1Ti “what-if” detailed presented below. Model 331s were a bit unusual in that they were designed specifically.32 H&R Magnum, and small internal cylinder shaping differences will not allow them to accept.32 Smith & Wesson rounds. The Model 432PD Magnum Chiefs Special Airweight In 2004, another version, the Model 431PD, also called the.32 Magnum Chiefs Special Airweight, was introduced. Though the base was the Model 31, and it was built on the same three-frame-screw J-Frame, the Model 431 is a very different revolver.
It is chambered for the.32 H&R Magnum, and.32 Smith & Wesson Long will not fit into the cylinders. Weight is substantially reduced from the Model 31 though the used of an alloy frame, though virtually all of the rest of the revolver is carbon steel. Finish is normally matte blued, but some had a matte stainless finish.
The barrel is a short 1.875 inches; the barrel shroud is light alloy, though it has a stainless steel liner. The grips may be checkered walnut, or a wrap-around rubber boot grip. The weapon was manufactured only until 2005, but sold until 2006; it was the last Chiefs Special produced in.32. The resemblances to the Model 331-1Ti are obvious. Special Versions In 2000, a version of the Model 331Ti, the Model 331Sc Chiefs Special Airlite Sc, was shown at the NRA 2000 show, along with a similar model, the Model 332Sc Airlite Centennial Sc (below). However, the Model 331Sc failed to appear in Smith & Wesson’s catalogs, and officially, none were ever sold.
The Model 3321c shown at the NRA 2000 show had a scandium alloy frame, and a cylinder made mostly of scandium alloy, and some parts of the cylinder made of aluminum. Other parts are made of steel. The revolver had a satin black finish and a Hogue Bantam rubber monogrip. Barrel length was 1.875 inches.
The Model 331Sc was very light in weight and had correspondingly heavy recoil. However, the Model 331Sc never made it to the market, though again it is rumored that a few leaked out. A rare version of the Model 31, the Model 631 Magnum Target Stainless, was produced for most of 1990, but never after that, and only 5474 were produced. As can be inferred from the name, the Model 631 is made almost entirely of stainless steel, with a matte finish.
Four versions of the Model 631 were produced. One is a version with a 2-inch barrel and fixed sights. Another has a four-inch barrel with a micrometer-adjustable rear sight, a narrow aiming rib, and a ramp front sight which has a red stripe on the slope of the ramp.
The Model 631 LadySmith is essentially the same as the 2-inch Model 631 for game purposes; it has rosewood stocks, and is laser-etched with “LadySmith” on the sideplates. A fourth version (called a “Kit Gun” version) has interchangeable 2-inch and 4” barrels, a round butt, the ramp front sight in a insert so that it can be replaced or removed, a micrometer-adjustable rear sight, a satin stainless finish, and a wider, serrated trigger. Only 40 of these were built; they are identical to the standard Model 631s for game purposes. A sort of fifth version exists; this can have a 2-inch or 4-inch barrel, but is professionally finished in matte black. This version was never in the Smith & Wesson catalogs; however, there are a substantial number of them and they all carry Smith & Wesson logos. It is a mystery who finished them, but the finish is tough, rust-resistant, and definitely a professional job. For game purposes, however, they are identical to standard Model 631s.
Dec 5, 2016 - Dewa perang dan pelindung planet, Mars pernah disegel pergi oleh Seiya, tapi waktu telah berlalu dan kebangkitan-Nya sudah dekat. Saint Seiya Legend of Sanctuary Subtitle Indonesia Download Saint Seiya Legend of Sanctuary Subtitle Indonesia Saint Seiya Legend of Sanctuary. Jun 24, 2015 - Sinopsis: Saint Saiya Omega Mengambil Cerita 25 Tahun Setelah Perang Suci. Download Anime Saint Saiya Episode 01 Subtitle Indonesia. Aug 27, 2017 - Download Anime Saint Seiya Omega Sub Indo atau Bahasa Indonesia Batch Paket Google Drive HD Bluray BD 1080P 720P 480P 360P MKV. Download anime saint seiya omega sub indo lengkap.
It should be noted that of all these versions of the Model 631, the LadySmith began production first, with the 4-inch barrel version being next, the standard 2-inch barrel version after that, and the Kit Gun being the last, near the end of the production run. It should also be noted that the 2-inch barrel version is also rather rare, with only 190 produced. Model 631s otherwise all have Goncalo Alves walnut combat grips with Smith & Wesson medallions, a smooth combat trigger which is wider than on most other members of the Model 31 family (except for the Model 631 Kit Gun), and a wide, serrated hammer.
Twilight 2000 Notes: The Model 331Ti (and Model 331Sc) and the Model 431PD are not available in the Twilight 2000 timeline.
The Smith & Wesson Airweight is a variation of the J-frame 5-shot revolver. The Airweight is made entirely of aluminum alloy and was first introduced in 1951. The Airweight was originally introduced as the Model 37, but the aluminum cylinder was unable to stand up to the pressure of a.38 special round, so the gun was quickly discontinued. The current Model 442 and Model 642 use a steel cylinder with an aluminum alloy frame, allowing them to handle the punch of.38 special round, as of 2015.
Both the Model 442 and Model 642 are identical, except the Model 442 is all black while the Model 642 comes in a silver matte finish. Both guns are compatible with Crimson Trace laser grips, but they come standard with Boot Grips from Uncle Mike's made of black elastomeric material, perfect for absorbing recoil. Both guns also have enclosed hammers, while other J-frame variations have exposed hammers.
The Airweight is designed to be compact and easy to conceal and carry. Both guns only weigh 15 ounces when unloaded and are small enough that they can fit in a purse or bag, but they are also holsterable, both in a belt holster and a pocket holster.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |